Surface modification of proteins by covalent binding of acrylic polymers

Surface modification of enzymes for a potential use in therapy was obtained with a new type of tailor-made copolymers ofNacryloylmorpholine andN-acryloxysuccinimide. The first monomer was designed to confer solubility on the polymer, whereas the second was used to give it reactivity toward protein amino groups. The reactivity of polymers of different composition towards amino acid derivatives and model proteins, such as catalase and ribonuclease-A, is described. Water soluble and catalytically active enzyme derivatives were obained using copolymers prepared with a mixture of N-acryloxysuccinimide andn-acryloylmorpholine in a 1:99 molar ratio. At increasing molar ratio (3:97, 10:90) extensive crosslinking between polymer and enzymes takes place, yielding insoluble adducts.     

磁性壳聚糖-聚丙烯酸微球的制备及表征

壳聚糖通过与丙烯酸接枝共聚制得壳聚糖聚丙烯酸悬浮液,在铁磁流体(Fe3O4)与聚乙二醇(分散剂)存在下通过与戊二醛交联,制备了磁性壳聚糖聚丙烯酸微球。用扫描电镜、红外光谱对合成的高分子微球进行形貌观察和结构表征,并进行了元素分析和磁性能测试,研究了磁性微球对牛血清白蛋白(BSA)的吸附效果。结果表明,合成的磁性微球外表呈球形,粒径为100～400nm;当Fe含量为2.47%时,磁性微球的饱和磁化强度约为1.30emug,磁矫顽力为280Oe,磁化率为2.16×10-4(常温下),属于顺磁性材料;其对BSA有较好的吸附效果,饱和吸附量约为400mgg。     

低分子量聚乙烯双单体非均相共接枝

在非均相体系中采用甲苯－水共沸条件下由自由基引发剂引发，低分子量的聚乙烯与丙烯酸和甲基丙烯酸甲酯进行双单体共接枝反应，从而对非极性聚乙烯进行化学改性，探索一条新型聚乙烯接枝改性的途径，考察了反应温度、时间、物料比、引发剂用量等诸多因素对接枝效果的影响。     

芳香PET树脂母粒的研制

通过丙烯酸和丙烯酸正丁酯溶液共聚合，得到丙烯酸－丙烯酸正丁酯共聚物，该树脂与环氧氯丙烷反应后再与PET树脂切片继续反应，可使PET树脂切片表面形成聚丙烯酸酯自膨润型吸油网络结构，将表面具有聚丙烯酸酯自身膨润型吸油网络结构的PET树脂切片（简称为留香剂）在油溶性香精中浸泡，香精就被吸附在留香剂表面，即得到芳香PET树脂母粒。用SEM观察了母粒的表面结构形态。     

Interaction of (1-phenylethyl)indole-2-carbonitrile with C-nucleophiles

Methods of obtaining ketones and enamino esters have been developed on the basis of reactions of 1-(1-phenylethyl)indole-2-carbonitrile with organomagnesium and organozinc compounds. Removal of a benzyl group from the indole nitrogen atom by the Grignard reagent has been discovered. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1179–1183, August, 2006.     

尼龙—6／丙烯酸接枝膜的结构与性能

应用ＩＲ确定了尼龙－６与丙烯酸接枝反应的接枝点位于尼龙大分子酰胺键的Ｎ原子上，用Ｘ射线衍射研究了接枝膜的结晶状况，探讨了接枝率对接枝膜的电阻、离子交换容量、强度等性能的影响．     

配糖蛋白B—阳离子丙烯酸树脂微胶囊的性能研究

本文研究了配糖蛋白B-阳离子丙烯酸树脂微胶囊的形态、粒径及粒径分布,并在模拟胃液的酸性缓冲液中进行了微胶囊的溶解释放试验。结果表明该微胶囊能溶于人体的胃液中,可配制适合儿童口服的混悬剂。     

Non-catalytic Addition of 1,2,4-Triazole to Nucleophilic and Electrophilic Alkenes

Non-catalytic addition of 1,2,4-triazole to vinyl ethers and esters occurs on heating (65-175°C, 4-20 h) to give Markovnikov adducts (yield 30-100%). Electron-deficient alkenes (acrylonitrile, acrylic acid, 4-phenyl-3-buten-2-one) react with 1,2,4-triazole (78-190°C, 4-20 h) to give anti-Markovnikov adducts in yields of 45-83%.     

Effect of synthesis method and buffer composition on the LCST of a smart copolymer of N‐isopropylacrylamide and acrylic acid

Responsive polymers have been the focus of many studies during the past decade because of their ability to change according to environmental stimuli. In this paper, we report on the development of a method to synthesize a pH/temperature‐sensitive linear copolymer, poly(N‐isopropylacrylamide‐ co‐acrylic acid)(poly(NIPAAm‐co‐AAc)), with a molecular weight of about 10⁶–10⁵ Da in water using azobisisobutyronitrile (AIBN) as the initiator. The effects of the following on the lower critical solution temperature (LCST) of the copolymer and homopolymer of NIPAAm were investigated: the type of buffer salts and pH changes of test solutions, molecular weight and concentration of homopolymer/copolymer solutions, and AAc monomer molar feed ratio (mol%). The effects of different synthesis methods on the molecular weight and on the AAc content were also evaluated. The mechanism of action in environments with different pH values is discussed. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis and characterization of block copolymers from 2‐vinylnaphthalene by anionic polymerization

The anionic polymerization of 2‐vinylnaphthalene (2VN) has been studied in tetrahydrofuran (THF) at ?78 °C and in toluene at 40 °C. 2VN polymerization in THF, toluene, or toluene/THF (99:1 v/v) initiated by sec‐butyllithium (sBuLi) indicates living characteristics, affording polymers with predefined molecular weights and narrow molecular weight distributions. Block copolymers of 2VN with methyl methacrylate (MMA) and tert‐butyl acrylate (tBA) have been synthesized successfully by sequential monomer addition in THF at ?78 °C initiated by an adduct of sBuLi–LiCl. The crossover propagation from poly(2‐vinylnaphthyllithium) (P2VN) macroanions to MMA and tBA appears to be living, the molecular weight and composition can be predicted, and the molecular weight distribution of the resulting block copolymer is narrow (weight‐average molecular/number‐average molecular weight < 1.3). Block copolymers with different chain lengths for the P2VN segment can easily be prepared by variations in the monomer ratios. The block copolymerization of 2VN with hexamethylcyclotrisiloxane also results in a block copolymer of P2VN and poly(dimethylsiloxane) (PDMS) contaminated with a significant amount of homo‐PDMS. Poly(2VN‐b‐nBA) (where nBA is n‐butyl acrylate) has also been prepared by the transesterification reaction of the poly(2VN‐b‐tBA) block copolymer. Size exclusion chromatography, Fourier transform infrared, and ¹H NMR measurements indicate that the resulting polymers have the required architecture. The corresponding amphiphilic block copolymer of poly(2VN‐b‐AA) (where AA is acrylic acid) has been synthesized by acidic hydrolysis of the ester group of tert‐butyl from the poly(2VN‐b‐tBA) copolymer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4387–4397, 2002